Blog
Customized solutions for milling cutter RDMW10T3
time：
2025-07-08 13:53
source：
Lizhou
But general models inevitably have limitations —— We customize for your needs RDMW10T3 Milling inserts
From material and coating to chip breaker, we optimize it for you, allowing this classic insert to perform 200% its strength on your machine!
Why are more and more manufacturers choosing to customize milling inserts with us? RDMW10T3？
RDMW10T3 What jobs can it do?
This 90 degree square shoulder milling insert is a “ multi-tasker ” ”, especially good at these fine or demanding jobs:
Precision mold machining:
The cavity and side surface of precision molds such as mobile phone cases and laptop shells require extremely high smoothness? It can mill brightly and accurately.
Parts “ Leveling ” and “ Trimming ”：
Processing the horizontal (step) and vertical sides of various mechanical parts, the dimensions are stable and reliable, and the right angles are clear.
Efficient roughing:
Although it mainly focuses on fine machining, after our customized strengthening (such as strengthening the cutting edge), it can also handle the efficient rough milling of certain materials, removing the allowance quickly and steadily.
Groove machining:
Milling keyways and various grooves requiring right-angle contours is its specialty.
Batch processing of small and medium-sized parts:
On production lines for small and medium-sized parts requiring stable quality, such as auto parts, hydraulic parts, and electronic device housings, it is often the mainstay.
After customization, RDMW10T3 where is it strong?
1. More wear-resistant and chip-resistant:
According to the material you are milling (steel, stainless steel, cast iron, or difficult-to-machine alloys?),
we match the most suitable cemented carbide substrate . Need super wear resistance? Or good toughness and impact resistance? Precise customization.
2. Smooth chip removal, no sticking:
We will optimize the chip breakers on the insert 。
Whether it is sticky stainless steel or tough materials, it can make the chips break neatly and smoothly discharge, protecting both the blade and the workpiece surface.
- Cutting is lighter and faster, and the surface is more beautiful:
By adjusting the rake angle of the insert and the cutting edge treatment (such as making it sharper or moderately reinforced)
reduce the cutting force and vibration. This not only reduces the burden on the machine tool, but also improves the surface finish, saving subsequent polishing.
- Durable and consistent:
Customized production ensures that the quality of each insert is strictly controlled and the performance is stable.
With a new insert, the processing effect is almost the same as the previous one, reducing debugging time, especially suitable for automated production.
RDMW10T3 When using milling inserts, you may be concerned about these:
The insert breaks easily?
This is usually because “ it's not tough enough ” or “ unstable ” (high vibration).
We will enhance the toughness of the insert itself to resist impact
Machining stainless steel / Aluminum alloy is easy to stick?
Sticking is annoying! To deal with sticky materials, the insert will be designed to be sharper (increase the rake angle) and coated with a smooth, non-stick “ coating ”。
At the same time, sufficient and correct cooling is essential! Use better cutting fluid and aim it at the cutting point.
The milled side is not vertical / There is an angle?
This is mostly because the insert is not installed correctly or the machine spindle “ is shaking ” . Please make sure the insert is installed and tightened in the tool holder.
Also check if the accuracy of your milling tool holder and machine spindle meets the standard.
Poor chip removal, chips flying everywhere and wrapping around the tool?
The chip breaker is the key! Tell us the cutting parameters you use (cutting depth ap , feed per tooth fz ) and material, and we will specially design or match the most suitable chip breaker shape for your situation. The coolant nozzle position should also be adjusted to effectively remove the chips.
Choose customization, choose smoother production!
Stop compromising your needs with standard blades.
We use real technology, flexible small-batch fast response, and reasonable prices to tailor-make truly useful RDMW10T3 milling cutters.
Recommended products
Hotline：
Add:No. 475 Jinshan Road, Hetang District, Zhuzhou City, Hunan Province, China
IPV4 / IPV6