Blog
FAQ
2026-01-09
LBC12 / LBC12S Carbide Round Bars—Stainless Steel Machining Base Material
The LBC12 and LBC12S cemented carbide round bars are manufactured using high-quality raw materials and a dry bag isostatic pressing process, resulting in a dense and stable microstructure. The LBC12 offers a balance of wear resistance and impact toughness, making it suitable for machining hardened steels with an HRC rating of 50 or higher. The LBC12S boasts even higher impact toughness, delivering more stable performance when machining stainless steels and titanium alloys, and is ideally suited for the production of long-life cutting tools.
2026-01-09
LBC09 Carbide Round Bars—Tungsten Steel Round Bar Substrates for High-Hardness Tool Materials
LBC09 cemented carbide round bars are made from ultrafine-grain materials and produced using a dry bag isostatic pressing process. The resulting matrix is dense and stable, offering both high hardness and toughness, making it ideal as a substrate for solid cemented carbide end mills and other cutting tools. These bars can be used for high-speed machining of hardened steels and a variety of difficult-to-machine materials, helping to extend tool life and improve machining stability.
2026-01-09
LBC05 cemented carbide round bars are suitable for machining graphite and CFRP.
The cemented carbide round bars are manufactured using submicron-grain alloys and a dry bag isostatic pressing process, ensuring a stable internal structure and excellent adhesion to diamond coatings. They are ideal for producing small-diameter cutting tools and deep-hole drills. These bars can be used for machining composite materials such as graphite and CFRP, and are also suitable for the manufacture of cutting tools, molds, and wear-resistant parts.
2025-12-30
The SNMX1205 square milling insert features a double-sided design with a total of 8 cutting edges. It boasts a robust structure and is ideal for heavy-duty rough milling applications involving deep cuts. The insert is stable, durable, and ensures smooth chip evacuation. It can be used for face milling and shoulder milling, making it suitable for machining steel, stainless steel, and hardened materials. This milling insert strikes an excellent balance between efficiency and cost-effectiveness, making it a practical choice for a wide range of milling operations.
2025-12-30
SNMU1305 Square Milling Insert | Double-Sided 8-Flute Heavy-Feed Milling
The SNMU1305 square milling insert features a double-sided design with a total of eight cutting edges. Its 0° back rake angle provides high rigidity, making it ideal for heavy-duty milling and deep, large-scale machining. The chip-breaker groove design ensures smooth chip evacuation, allowing the insert to be used effectively for face milling of both steel and stainless steel workpieces while balancing machining efficiency, stability, and cost-effectiveness.
Hotline：
IPV4 / IPV6